Alloy 20 Cold Rolled Plates, Carpenter 20 HR Sheets, ASTM B463 Alloy 20 Plate, Alloy 20 Plates, Alloy 20cb3 Sheets and Plates, ASME SB 463 Incoloy 20 Sheets, Alloy 20 Sheets, Alloy 20 Industrial Sheets and Plates Manufacturers and Suppliers

Rajveer Stainless is one of the well established and trusted suppliers of Alloy 20 Sheet Plate. We have been serving our clients with superior quality products for many years.These are made from nickel-iron-chromium austenitic alloy. The nickel content is less than half of the total amount of alloys present in the fastener. It was developed by carpenter technology and these sheets are also known as Carpenter 20 Sheets.  It is super austenitic due to the presence of iron in abundance in it. These sheets offer excellent resistance to corrosion under the effect of water, air, and alkali. They offer tremendous resistance to attacks of all kinds of acids especially sulfuric acid. They even withstand the after-effects of contact with hot sulfuric acid. These sheets are commonly found in chemical mixers and fertilizer manufacturing equipment. Usually, these are a cost-effective alternative to other sheets. The presence of nickel in a considerable proportion makes it light weighted. Some of the prominent heavy industries that make regular use of these sheets are chemical processing industries and large power generation units.

These plates are designed to withstand unconditional variations in temperature. These can retain most of their properties even at extreme temperatures. Their physical strength remains intact at very high temperatures. These sheets due to its resistance to all kinds of corrosions are apt for utilization in marine applications. To go with that their dimensional accuracy is one of its prime features. These properties make it easier to transport for long distances.

These sheets can withstand sulfuric acid which makes them a popular product in this category. The quantity of nickel has given immunity to chloride stress corrosion cracking. These sheets are not prone to SCC problems, which may regularly occur with sheets from other alloys. Utilization of these sheets can be a better solution in comparison to the use of sheets from other alloys. These are commonly used in chemical processing, dye production, and food processing plants. Apart from these are also used in desulfurization and pharmaceutical plants.. 

Alloy 20 Sheet & Plate

Incoloy Alloy 20 Sheets, Alloy 20cb3 N08020 Sheets, Alloy 20 UNS N08020 Plates, Alloy 20 2.4660 Sheets, 2.4660 Plate, Alloy 20cb3 Hot Rolled Plate, Carpenter 20 N08020 Plates, Alloy 20cb3 2.4660 CR Sheet, Incoloy 20 Sheet & Plate Exporter in India.

Designed as per international and national standards, these UNS N08020 Sheet & Plate are offered in customized length sizes and shapes to our esteemed clients. Also referred as WNR 2.4660 Sheet & Plate these are available at best possible rates in the market.

We are an authorized Dealer, as well as Supplier of Alloy 20 Sheet & Plate of various Approved Manufacturing companies like JFE, Sanyo Japan, NSSMC Japan, JSW, Acronis etc.

Incoloy 20 Shim Sheets, Alloy 20 Coils, Alloy 20cb3 Plate in Egypt, Carpenter 20 Plates, Alloy 20 Perforated Sheets, Alloy 20 Chequered Plate, Carpenter 20 Sheets, Plates Exporters in Iran

Alloy 20 Sheet & Plate Specification :

Specifications: ASTM B463 / ASME SB463, AMS 4544

Dimensions: ASTM, ASME, and API

Thickness : Ranging from 0.3mm to 20mm

Length: 2000 mm / 2440 mm / 2500 mm / 3000 mm / 6000 mm

Hardness : As per ASME A & NACE MR 175

Width : 1000mm / 1219mm /1250mm / 1500mm / 2000mm

Finish : Hot rolled plate (HR), Cold rolled sheet (CR)

Form: Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.

Equivalent Grades :
Alloy 20 2.4660 N08020 Z2NCUD31-20AZ NiCr20CuMo

Chemical Composition :
Grade C Mn Si S Cu Ni Cr Fe Mo P
Alloy 20 0.07 max 2.00 max 1.00 max 0.035 max 3 – 4 32 – 38 19 – 21 29.85 min 2 – 3 0.045 max

Mechanical properties
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi -80,000, MPa -551 Psi - 35,000, MPa - 241 30 %

Types of Alloy 20 Sheet & Plate

Alloy 20 Plates

Alloy 20cb3 Plates

Alloy 20cb3 Sheets

Carpenter Alloy 20 Sheets

Alloy 20 Hot Rolled Sheets and Plates

Alloy 20 Cold Rolled Sheets & Plates

Incoloy 20 Sheets, Plates

Alloy 20 Coils

Alloy 20cb3 UNS N08020 Plates

Incoloy 20 N08020 Plate

Alloy 20 N08020 Sheets

Alloy 20 2.4660 Plate

Alloy 20cb3 DIN 2.4660 Sheets

Carpenter 20 2.4660 Coils

Application of Alloy 20 Sheet & Plate
Petrochemical Oil & Gas Paper Refineries Nuclear Power
Cement Sugar Power Plant Fertilizers Breweries
Chemical Petrochemical Shipbuilding Defence Mining
Steel Plant Construction Oil Mills Paper Engineering Co.

JFE Make Alloy 20 Sheets and Plates

JFE Make Alloy 20 Sheets and Plates

Sanyo Japan Make Alloy 20 Sheets and Plates

Sanyo Japan Make Alloy 20 Sheets and Plates

NSSMC Japan Make Alloy 20cb3 Sheets and Plates

NSSMC Japan Make Alloy 20 Sheets and Plates

JSW Make Alloy 20 Sheets and Plates

JSW Make Alloy 20 Sheets and Plates

Acronis Make Alloy 20 Sheets and Plates

Acronis Make Alloy 20 Sheets and Plates

Singapore, Malaysia, Thailand, Eqypt, South Africa, Brazil, Colombia, Venezuela, Saudi Arabia, Bahrain, Australia, New Zealand