Rajveer Stainless and Alloys is one of the leading Manufacturer, Supplier and Exporter of Mild Steel Pipes & Tubes that is being made up from High Quality of Standard Raw Materials. Mild steel Pipes, also recognized as plain-carbon steel, is at the moment called as the most general form of steel, for the reason that its cost is comparatively low, but at the same time it offers material characteristics that are being good enough for a lot of applications. These MS Pipes have a moderately low tensile potency, but it is quite not expensive and trouble-free to form, whereas surface hardness of the same can be increased all the way through carburizing. Our pipes are time and again used when large amount of steel quantities are required, for a case in point as structural steel. Mild Steel Tubes are manufactured by using low carbon steel, which would be in the range of less than 0.25 percent. However, due to low carbon content in these tubes, they do not become firm and are quite simple to use
Designed as per international and national standards, these MS Pipes & Tubes are offered in customized length sizes and shapes to our esteemed clients. We also offer the same at best possible rates in the market.
We are an authorized Dealer, as well as Supplier of Mild Steel Pipes & Tubes of various Approved Manufacturing companies like Nippon Steel, Sandvik, Sanyo Special Steel, Kobe Steel, Schoeller Bleckmann, Salzgitter Mannesmann, Tubacex etc.
Dimensions: ASTM, ASME and API
Size: 15mm NB to 150mm NB (1/2” to 6”), 7″ (193.7mm OD to 20″ 508mm OD)
Tubing Size: 1/8"NB TO 30"NB IN
Specialized in: Large Diameter Size
Grade: IS 1239, IS 3589 (Fe 330, Fe 410)
Form: Round, Square, Rectangular, Hydraulic Etc
Length : Standard, double & in cut length also.
End: Plain End, Beveled End, Threaded
Seamless Mild Steel Pipes |
Seamless Mild Steel Tubes |
MS Pipes |
MS Tubing |
Square MS Pipe |
Square MS Tube |
MS Cold Drawn Seamless Pipes |
MS Cold Drawn Seamless Tubes |
Mild Steel IS1239 Pipes |
Mild Steel IS1239 Tubes |
Mild Steel Seamless Pipes |
Mild Steel Seamless Tubes |
Mild Steel IS 3589 Pipes |
Mild Steel IS 3589 Tubes |
Mild Steel Welded Pipes |
Mild Steel Welded Tubes |
MS Boiler Pipes |
MS Boiler Tubing and Tubes |
Mild Steel Hydraulic Pipes |
Mild Steel Hydraulic Tubes |
Industrial Mild Steel Pipes |
Industrial Mild Steel Tubes |
Round MS Pipe |
Round MS Tube |
M.S Pipes |
M.S Tubes |
Mild Steel Pipes & Tubes Application
| Petrochemical | Oil & Gas | Paper | Refineries | Nuclear Power |
| Cement | Sugar | Power Plant | Fertilizers | Breweries |
| Chemical | Petrochemical | Shipbuilding | Defence | Mining |
| Steel Plant | Construction | Oil Mills | Paper | Engineering Co. |
JFE Steel Corp.
Nippon Steel
Tenaris
Vallorec & Mannesman
ArcelorMittal
SeAH Steel Corp.
Tubos Reunidos
US Steel
ISMT
Jindal Saw Ltd.
Maharashtra Seamless Ltd.
SABIC
(Saudi Arabia)
Aramco
(Saudi Arabia)
ALBA
(Saudi Arabia)
QAFCO
(Qatar)
MAADEN
(Saudi Arabia)
KNPC
(Kuwait)
KOC
(Kuwait)
Qatar Petroleum
(Qatar)
PDO
(Oman)
ADNCO
(U.A.E.)
ORPIC
(Oman)
Takreer
(Abu Dhabi)
YASREF
(Saudi Arabia)
PetroBras
(Brazil)
PETRONAS
(Malaysia)
NIOC
(Iran)
NPDC
(Nigeria)
EGPC
(Egypt)
| Mild Steel Pipes & Tubes Dimensions | |||||||||
| Nominal Bore | Outside Diameter | Light (A-Class) Thickness Weight | Medium (B-Class) Thickness Weight | Heavy (C-Class) Thickness Weight | |||||
| Inch | mm | Inch | mm | mm | kg/mtr | mm | kg/mtr | mm | kg/mtr |
| 1/8″ | 3 mm | 0.406 | 10.32 | 1.80 | 0.361 | 2.00 | 2.65 | 0.493 | |
| 1/4″ | 6 mm | 0.532 | 13.49 | 1.80 | 0.517 | 2.35 | 0.407 | 2.90 | 0.769 |
| 3/8″ | 10 mm | 0.872 | 17.10 | 1.80 | 0.674 | 2.35 | 0.852 | 2.90 | 1.02 |
| 1/2″ | 15 mm | 0.844 | 21.43 | 2.00 | 0.952 | 2.65 | 1.122 | 3.25 | 1.45 |
| 3/4″ | 20 mm | 1.094 | 27.20 | 2.35 | 1.410 | 2.65 | 1.580 | 3.25 | 1.90 |
| 1″ | 25 mm | 1.312 | 33.80 | 2.65 | 2.010 | 3.25 | 2.440 | 4.05 | 2.97 |
| 1.1/4″ | 32 mm | 1.656 | 42.90 | 2.65 | 2.580 | 3.25 | 3.140 | 4.05 | 3.84 |
| 1.1/2″ | 40 mm | 1.906 | 48.40 | 2.90 | 3.250 | 3.25 | 3.610 | 4.05 | 4.43 |
| 2″ | 50 mm | 2.375 | 60.30 | 2.90 | 4.110 | 3.65 | 5.100 | 4.47 | 6.17 |
| 2.1/2″ | 65 mm | 3.004 | 76.20 | 3.25 | 5.840 | 3.65 | 6.610 | 4.47 | 7.90 |
| 3″ | 80 mm | 3.500 | 88.90 | 3.25 | 6.810 | 4.05 | 8.470 | 4.85 | 10.1 |
| 4″ | 100 mm | 4.500 | 114.30 | 3.65 | 9.890 | 4.50 | 12.10 | 5.40 | 14.4 |
| 5″ | 125 mm | 5.500 | 139.70 | – | – | 4.85 | 16.20 | 5.40 | 17.8 |
| 6″ | 150 mm | 6.500 | 165.10 | – | – | 4.85 | 19.20 | 5.40 | 21.2 |
| Mild Steel Pipes & Tubes Tolerance | ||
| (a) Thickness | ||
| (1) | Butt welded Light tubes | +Not limited – 8 percent |
| Medium and Heavy tubes | + Not Limited – 10 percent |
|
| (2) | Seamless Tubes | +Not Limited – 12.5 percent |
Qatar, U.A.E., Iran, Oman, Saudi Arabia, Bahrain, Singapore, Malaysia, Thailand, Eqypt, South Africa, Brazil, Colombia, Venezuela, Australia, New Zealand
